United States Machine Tools Corp. (USMT) is recognized as one of the bestand highly respected maniche tool rebuilders, remanufacturers, and retrofitters of precision machine tools.
USMT has added a line of Vertical Boring and Vertical turning machines from 60" to 220" of swing, aimed primarily at the aerospace and power generation markets.
USMT machines areassembled with American components.
North American customers have been looking for a quality American machine that is fully serviced by a builder rather than an importer.
USMT VTL60
|
Compact floor plan design: 4800L x 4500W
|
Technical Specifications
USMT VTL60 |
| Capacity |
| Maximum turning diameter |
65 |
inches |
| Maximum turning height |
60 |
inches |
| Maximum torque at table |
12871 |
ft-lbs |
| Maximum work piece weight |
24000 |
lbs |
| Table |
| Table Diameter |
60 |
inches |
| Table speed range |
1-300 |
rpm |
| Number of ranges - gear |
2 |
H/L |
| Ram Head |
| Ram cross section |
10 x 10 |
inches |
| Horizontal travel X axis |
55 |
inches |
| Vertical travel Z axis |
50 |
inches |
| Cross - rail |
| Vertical travel of cross rail |
40 |
inches |
| Hydraulic indexing (locking) |
4 |
Inch inc |
| Feeds |
| x/z axis cutting feeds |
0.039 - 236 |
IPM |
| x/z axis rapid travel rate |
315 |
IPM |
| Cross rail elevation |
16 |
IPM |
| Automatic tool changer |
12 position |
|
| Maximum tool weight |
110 |
lbs |
| Motors |
| Table motor |
60kw/ 80 |
hp |
| x/z axis motor |
180 |
In-lbs |
| Cross rail elevation motor |
5 |
hp |
| Power source |
80 |
kva |
| Machine dimensions |
| Machine/ Max Height |
122/205 |
inches |
| Length |
177 |
inches |
| Width |
150 |
inches |
| Machine weight |
53000 |
lbs |
| Accuracy |
| Positioning +/- |
0.0005’ in 55” |
| Repeatability +/- |
0.0004” |
|
USMT VTL60 has the best accuracy:
- Rigid cast iron construction
- Precision positioning system for crossrail with hydraulic clamping
- Ram positioning system with hydraulic clamping
Other features
- Vertical drive motor - ZF gear box
- GE Fanuc control and motors
- Heidenhain glass scales and encoders
- 12 position ATC
- Full chip and enclosure splash
- Hydraulic System/coolant system
- Cross rail telescoping way covers
Machine options
- Toll Probe & Part probe Renishaw
- 2nd Ram and 12 station tool changer
- 2nd Toll changer to increase tooling to 24
- Live spindle from 0hp to max 2,000rpm
- C axis spindle drive
- Hydraulic chuck
Service and support
Our staff is fully trained in building machines from the base up.
USMT will assist you until you are “up and running.” And provide competent service at your facility within 24 hours.USMT now offer that complite solution
|
