• CNC Rebuild
  • CNC Programming
  • In field retrofit
  • Laser Alignment and Measurements
  • Machine Disconnect and Reconnect service
  • Mechanical and Electrical Support
  • GE Fanuc installation, GE support, GE OEM reseller
  • Ball Bar Measurement & Alignment
  • Sheet Metal Design
  • Enclosure Fabrication
  • Engineering Support Mechanical & Electrical
  • CNC Machine Parts and Accessories Supplier
    • Print this page

    Machine Serviced

    CNC Turning Centers, Machining Centers, Vertical Turret Lathes, Boring Mills – Horizontal or Vertical, Jig Borers, Milling Machines, Engine Lathes, Surface Grinders of all types, Cylindrical Grinders, Internal Grinders, Universal Grinders, Vertical Grinders, Creep Feed Grinders, Form Grinders, Jig Grinders, Tool & Cutter Grinders.

    Excello Form Grinder, Model 85 AL

    Completely remanufactured and retrofitted with a new GE/Fanuc CNC System and a new GE/Fanuc Servo System. Two new roll dressers with two axis control were installed as an integral part of the project. A new hydraulically actuated machine  cover was added to retain the coolant when the machine is in production, and to improve operator access when the machine is down for set-ups and wheel changes.

    (Note) the production rate increased 300%, and we virtually eliminated the 50% scrap rate previously produced on this machine.

    Jones & Lamson TNC Chucker Lathe, Model 312A

    Completely remanufactured and retrofitted with a new GE/Fanuc CNC System and a new GE/Fanuc AC Servo System.

    (Note) the new operator's panel is located on a convenient swing/swivel pendant arm for ease of operation

     

    Jones & Lamson TNC Universal Lathe, Model 4515

    This machine was retrofitted with a new  Dynapath Delta CNC System.
    The existing Servo system was utilized at the customers  request. The operator's pendant was relocated onto a swivel for easier access to the controls.

     

    Gallmeyer & Livingston Creep Feed Surface Grinder, Model 556
    Completely remanufactured and retrofitted utilizing a GE/Fanuc CNC System and GE/Fanuc Servo System.  Besides the restoration of alignments and accuracies to all axes, the remanufacture process included:  adapting a new diamond roll dresser, a new coolant system, a new hydraulic system, and a new machine enclosure.

    Excello Dual Horizontal Form Grinder, Model 85

    The Excello Form Grinder was completely remanufactured and retrofitted.  The retrofit included a new GE/Fanuc AC Servo System.  This machine was configured as a 5/7 axis system.  The  remanufacturing process included: major axis alignment and accuracy corrections, two new diamond roll dressers with Servo controlled stagger adjustments, new ballscrews, new variable speed AC spindle motors, and rebuilding of the wheelhead spindles, coolant system, lubrication system, hydraulic system, and automatic door closer.

     

    Devlieg Jig Mill, Model 4H72

    This machine was completely remanufactured and retrofitted with a Dynapath Delta CNC System. The remanufacturing process included rebuilding of the quill, spindle bar, and restoration of alignments and accuracies on all axes to exceed the original specifications.

     

    Cincinnati-Milacron Cinturn NC Chucking Lathe, Model M0

    Completely remanufactured and retrofitted utilizing a GE/Fanuc CNC System and GE/Fanuc Servo System. The pendant has been constructed and positioned to be convenient to the operator. Note the unique color! USMT will paint your machine to your specifications using an epoxy hardened finish that is resistant to oils and coolant.

    Cincinnati-Milacron Horizontal Machining Center, Model H100 (5H2500)

    Completely remanufactured and retrofitted utilizing a new Dynapath Delta CNC System and new electric Servo motors installed on all three axes. Alterative CNC Systems and AC Servo systems are also available on this machine with the option of 2/3 axis or a full 3-axes configuration. USMT has also provided a rotary table as a 4th axis on this machine.

    Also provided is a smaller and much quieter hydraulics power unit, the elimination of the floor mounted electrical control cabinet, and a 10 HP spindle motor and drive system replaces the old 5 HP unit. The large work table surface and large travel range makes this machine ideal for short runs on large work pieces.

     

    Campbell Twin Spindle Vertical Grinder, Model ER-5668-24SM

    This machine was completely remanufactured and retrofitted.  A new GE/Fanuc CNC System configured for 4-axes operation, and a GE/Fanuc AC Servo system was installed for the retrofit. A new operator friendly swivel/swing type pendant was added. The remanufacture process included: restoration of alignments and accuracies on all axes, new spindle motors, new wheel dressers, new coolant system, rebuilt rotary worktable, and rebuilt spindles.

    Campbell Vertical Grinder, Model #FR-3660-18SM

    This machine was completely remanufactured and retrofitted. A GE/Fanuc CNC System with a GE/Fanuc AC Servo system was integrated in the retrofit process. The remanufacture process included: restoration of the accuracies for all axes, installation of a new diamond roll dresser, rotary table rebuilding, new wheel head spindle and drive motor, a new coolant system, new automatic lubrication system and the rebuilding of the hydraulic system.

     

    Boehringer CNC, VDF Turret Lathe, Model PNE-710F

    Completely remanufactured and retrofitted utilizing a GE/Fanuc CNC System and GE/Fanuc Servo System. Renishaw parts and tool probing was installed and integrated. A new automatic door closer system was also provided. Note the clean appearance of this machine as measures were taken to conceal and protect all wiring, cables and hoses, except for the coolant line.

     

    Pratt & Whitney Vertical Machining Center, Model Triax "2654"

    Remanufactured and retrofitted with a Dynapath Delta CNC System, a new Servo System, and with a larger capacity spindle drive. Alternative CNC Systems are also available for this machine. This versatile machine, with it's large table work surface and travel range is ideal for easy set-ups on medium size work pieces. 

    (Note) We presently have two frames in stock.

     

    Pratt & Whitney Jig Borer, Model 2A

    Completely rebuilt from the base to the top including precision hand scraped way surfaces, new leadscrews and leadscrew nuts, and rewinding of the motors. A first class rebuild for a first class machine!

     

    Pratt & Whitney "Tape-O-Matic", Model C

    This machine has been upgraded and modernized by remanufacturing and retrofitting with a  Dynapath Delta CNC System. This conversion is available as a 2/3-axes or a full 3-axes configuration. The large work table surface and ample axis travel range makes this older machine very versatile for short runs. Note the power gib locks which were added on the head to improve rigidity.

     

    Pratt & Whitney Precision CNC Jig Borer, Model 1000

    This precision CNC Jig Borer was completely remanufactured and retrofitted. The original CNC System was replaced with a Dynapath Delta CNC system. In this case the customer elected to retain the DC Servo System. USMT Added encoders for feedback. The remanufacture procedure included restoration of alignments and accuracies to all axes and the rebuilt spindle quill, repair of the counterbalance unit, replacement of the spindle drive motor with a variable speed DC motor to eliminate the variable pitch sheave, and rebuilding of the lubrication system.